Veneered Wood Tiles & Panels

American Cherry	American Walnut	American White Oak
American Maple	Anigre	Ash
Bamboo	Beech	Birch
Cedar	European Oak	Hemlock
Koto	Pine	Red Oak
Spruce	Sycamore	Teak

Choose from more than 40 veneers to create the ideal ambiance and feel. From light to dark tones, there is a veneer for each design. Standard, the panels are provided with a transparent lacquer, but if a special look is required, special varnishes, staining or paint finishes are also possible.

Veneer matching


The veneer sheets, with a width of 10-25 cm, are mis-matched and glued to form panels. Upon request it is also possible to slip-match or book-match sheets. Depending on how the veneers are matched, a significant design is created

Book Matched	Slip Matched	Mis Matched (standard)

The veneered wood ceiling tiles can be produced in the following standard sizes: 600 x 600, 1200 x 600 and 1800 x 600 mm. Special sizes are available upon request. Depending on the required joint width an acces requirements, there are four panel types available. The ceiling tiles can me installed in a metal T-24 grid.


Classic - Exposed grid

The Classic panel is a typical lay in panel, which can be laid on a T24mm grid.





Modern - Semi - exposed grid

The Modern panel, due to the special edge detail, only shows 4mm of the T24mm grid after assembly. Each panel can be easily removed downwards and allow full access to the plenum with a simple push.





Prestige - Concealed grid

The Prestige system has a special edge finish that ensures that the substructure is completely concealed. Every panel can still be removed, simply by lifting and tilting.

Veneered Wood Wall Tiles


The Veneered Wood Wall Tiles can be produced up to 2700x1200mm. Special sizes are available upon request. Depending on the required joint width and access requirements, there are two panel types available.

Standard - Open joints
Trend - Closed joints

Topline Ceiling & Wall Panels   


Topline panels are available in a standard size of 128 mm x 2780 mm, available for ceiling as for wall applications. The fixing is done directly on a substructure with use of metal clips. The Topline panels are high performance sound absorbing panels, which is achieved through a unique milling and groove pattern, combined with an acoustic membrane. The design and acoustics for each project can be fully attuned by selecting the right model that will ensure sound energy is almost completely absorbed, or reflected. Due to the tongue and groove connection, the joints between the panels are invisible.

Acoustic performance


Acoustical comfort in an office space, school or public building contributes to our well-being as good acoustic comfort can positively affect health, communication, safety, productivity and learning.

One of the most important benefits of the Hunter Douglas Veneered Wood range is the wide scope of perforation patterns, which can be applied to all veneered panels. Depending on the type of perforation, a specific acoustical performance is achieved. Please find below a selection of the standard perforation patterns, other patterns available upon request.

Nano-perforation: Invisible Acoustics


The veneered ceiling panels can be provided with nano-perforations. This process involves making countless microscopic perforations (Ø 0.5 mm) in the veneer, thus concealing the more extensive perforation of the core material. This allows for excellent acoustic qualities without compromising on appearance. The panels feature acoustic fleece on the reverse. In testing, the nano-perforated panels were shown to have a sound absorption of αw: 0.95 and NRC: 0.90.

Reaction to fire


By impregnating wood, a reaction to fire classification (EN13501-1) of B-s1,d0 can be achieved.